This micro-module allows the centralization of roller shutters, shutters, casement or

blinds through push buttons, either exclusively or with the radio remote control Yokis or box

home automation-compatible protocol YOKIS.

The MVR500ER is compatible with all motors with 3 wires (common, open, close).

The stops may be of electrical or electronic set on the shutter itself.

In the case of mechanical stops on the race of the pane is defined by stoppers which stop the shutter mechanically, the micromodule MVR500ER detects an overload and immediately shuts off the power to the motor.

The MVR500ER is also compatible with the motors 4-wire (Phase, neutral, uphill, downhill) in the control mode permanent uphill or downhill. If you have roller shutters with integrated radio module MVR500ER is not compatible.

Features:

• Power motor 3 wire 230V ~ 2A max. 500VA

• Mains voltage 230V ~ +10% -15% 50HZ

• Ambient temperature -20°C +50°C

• Relative humidity 0% to 70%

• Dimension 48mm x 33mm x 22.5 mm

• Frequency 2.4 GHz

• Retains the data in case of power failure