Paradox R915 outdoor badge reader keypad

Paradox R915 badge reader keypad for Paradox alarm system

The Paradox R915 Keypad Reader is a weatherproof 4-wire proximity reader with an integrated backlit 12-key keypad for PIN entry.

The Paradox R915 badge reader keypad is compatible with all Digiplex or EVO control panels and connects to an ACM12 using only 4 wires to facilitate installation.

Keyboard

This reader can use card or PIN functions. However, the PIN must be entered after the card swipe if the functions of

cards and PINs are activated. It is also possible to use only the card or PIN or the card or PIN settings that

are set in the ACM12. PIN settings are only available in ACM12 V4.0 or later. The key is

used to cancel PIN entry, the key is used when using Variable Code Length and when entering a PIN code.

less than 6 characters.

Arming and disarming

It is currently possible to arm and disarm the system if the appropriate options are enabled in the user settings and

Door. Refer to the EVO Programming Guide for more information.

Three-color LED display

This reader includes a tri-color LED display (red, green, and amber) that is used to indicate system status, as shown in the LED display panel.

Audible tone

The reader includes a built-in buzzer.

weather resistant

The rubber gasket and plastic circuit board cover allow you to mount the R915 indoors or outdoors.

Characteristics of the R 915 badge reader keypad :

• Compatibility: Card only: DGP-ACM11 V. 3.0 or later

• Card / PIN: ACM12 V. 4.0 or later

• Input voltage: 11 VDC at 14.5 VDC

• Current consumption: 60mA

• Frequency: Exciter field - pulse modulated

• at 125KHz

• Temperature of

• operating: -35°C (-31°F) to +65°C (149°F)

• Output format: 4-wire (RS-485)

• Cable length: 300 m (1000 ft)

• Cables: 4-wire cables (recommended: twisted pair cable)

• White colour

• Weather resistance: rubber seal and plastic cover

• for the circuit board.