

SIP WIFI intercom station
You must have at least a WIFI level of 50% in clear and overcast weather at the installation point
Integrated processor
Built-in Linux operating system
Operation by mechanical buttons
H.264 video compression
1/2.8" CMOS Image Sensor, 2 Megapixel
Low lighting
Infrared lighting for night vision
Infrared light compensation
Day / Night with ICR filter
Viewing angle 125°(H), 72°(V), 142°(D)
WDR 120dB
3D noise reduction
Video sensor
Stream 1: WVGA/720P/D1 (25/30 fps)
Stream 2: CIF/WVGA/QVGA/1080P/D1 (25/30 fps)
Compression audio G.711Mu, G.711u, PCM
Two-way audio
1 audio input
Incorporates a speaker
Echo suppression and digital noise cancellation
Automatic image capture (can only be enabled on indoor monitors)
Configuration Web
IC Card Reader
Up to 10000 cards
Map reading range: 3~5cm
Unlock Modes: Map, App, Indoor Monitor
1 RS485 port
1 electrical holding port
1 alarm input / 1 output
1 power outlet
1 output button port
1 door status detection port
1 door control port (NC default)
Self-protection
Incorporates IEEE802.11b/g/n WiFi, 2.4GHz
10/100M network interface
Network Protocol: SIP, P2P, IPv4, DNS, RTSP, RTP, TCP, UDP
Onvif Compatibility
DEGREE OF PROTECTION IP65 (requires silicone seal)
Polycarbonate and acrylic box
Surface installation
Power Supply: 12V DC, 1A
Supports standard PoE
Consumption: ≤1W (sleep), ≤7W (operation)
Supports standard PoE
-30C~+60°C operating temperature
10%~90% relative humidity (non-condensing)
Dimensions: 100 (W) x 150 (H) x 24.8 mm
Weight: 490 g
No customer reviews for the moment.